Concentrate83 Ready-To-Use94 Ready-To-Use/Concentrate4

Bacteria2 Dirt2 Dust3 Fingerprints3 Germs2 Grease2 Body Oils1 E. coli1 Fungus1 Grime2 HIV-11 Makeup1 Mildew1 Mold1 MRSA1 Organic Matter2 Salmonella choleraesuis1 Smudges1 Soil1 Staphylococcus aureus1 Viruses1 VRE1 Water-Based Soil2

Citrus10 Citrus Floral9 Fresh34 Fresh Citrus10 Lavender14 Original15 Characteristic5 Cherry1 Cherry Almond1 Chlorine1 Citrus & Cedar1 Citrus Bouquet1 Clean2 Clean & Fresh Lemon1 Coconut & Water Lily2 Country Fresh1 Crisp Linen9 Early Morning Breeze4 Eucalyptus1 Eucalyptus Peppermint2 Eucalyptus Spearmint & Thyme2 Floral1 Fragrance-Free1 Fresh Clean3 Fresh Lemon3 Fresh Pine2 Lavender & Jasmine2 Lavender Fields2 Lemon9 Lemon Breeze3 Lemon Fresh5 Lemongrass Citrus2 Lemongrass Mandarin1 Lemon Zest1 Light Breeze1 Mild1 Mint1 Minty5 Neutral2 Ocean Breeze2 Original Eucalyptus2 Original Pine1 Pine2 Pleasant3 Pleasant Lemon4 Quaternary5 Rain Clean2 Regular3 Sparkling Wave1 Spring Waterfall3 Surfactant3 Unscented1 Waterfall1

0.10 oz (0.01 lb)1 0.13 oz (0.01 lb)1 0.99 oz (0.06 lb)1 12.50 oz (0.78 lb)3 19 oz (1.19 lb)4 24 oz (1.50 lb)2 15 oz (0.94 lb)1 19.01 oz (1.19 lb)1 28.80 oz (1.80 lb)1 32 oz (2 lb)1 67.60 oz (4.22 lb)1 67.63 oz (4.23 lb)1 128 oz (8 lb)1

Aerosol16 Foam2 Liquid126 Powder2 Spray131 Wipe13 Gel1 Towel1

2/Pack2 70/Tub2 110/Bag2 150/Tub4 Bottle26 Spray Bottle9 6/Carton1 60/Tub1 85 Wipes/Canister1 85/Tub1 140/Roll1 160/Bag1 160/Tub1 180/Bundle1 220/Tub1 Aerosol Spray Can2 Can1 Cartridge2 Jug1 Trigger Bottle2

Liquid5 Spray1

Aerosol Spray Can2 Bag3 Bottle26 Cartridge2 Spray Bottle9 Tub10 Bundle1 Can1 Carton1 Jug1 Pack2 Roll1 Trigger Bottle2

6" Width x 5" Length3 6.75" Width x 8" Length2 6.75" Width x 9" Length2 11" Width x 12" Length1 12" Width x 6" Length1 12" Width x 12" Length2 6" Width x 6.75" Length1 7" Width x 8" Length1

Bottle2 Kit1 SmartDose™1 Spray Bottle1 Spray Bottles and Cartridges1

1 gal3 1.4 L1 12 oz1 16 oz1 32 oz1

2 - 82 6 - 83 72 7 - 83 7.93 12.5 - 13.52 2 - 2.31 2.0 - 3.51 2.11 2.71 61 6 - 91 7.0 - 8.02 11.11 12.51

Clean and disinfect high-touch surfaces in just ONE Minute, Non-irritating to eyes and skin2 DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling.?Kitchen countertops and similar, food-contact surfaces must be rinsed with clean potable water following application.TO CLEAN: Spray 6-8 inches (15-20 cm) from surface until thoroughly covered. For tough jobs, let stand several minutes before wiping. Rinse.TO DISINFECT: Spray 6-8 inches (15-20 cm) from surface until thoroughly wet. Let surface stand wet for 5 minutes and wipe.2 DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Before use in federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected. DILUTION: [1:256] ½ oz. per gallon of water DISINFECTION/VIRUCIDAL*/FUNGICIDAL/MOLD AND MILDEW CONTROL DIRECTIONS: Apply use-solution to hard, nonporous surfaces, thoroughly wetting surfaces with a sprayer. Treated surfaces must remain wet for 3 minutes. For disinfection against Enterovirus. 5 minute contact time. For disinfection against Legionella pneumophilia, Staphylococcus aureus - Multi-Drug Resistant, and SARS Associated Coronavirus use 10 minute contact time. Wipe dry with a cloth, sponge or mop or allow to air dry. For heavily soiled areas, a preliminary cleaning is required. Spray 6 - 8 inches from the surface; rub with a brush, sponge or cloth. Do not breathe spray. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware and dishes. Bactericidal Stability of Use-Dilution: Tests confirmthat the use solution of this product, when stored in a sealed container such as a spray bottle, remains effective for up to 1 year. If product becomes visibly dirty or contaminated, the use-dilution must be discarded and fresh product prepared. Always use clean, properly labeled containers when diluting this product. For fungicidal activity: Betco Triforce is an effective fungicide against Trichophyton mentagrophytes [the athlete's foot fungus] when used on surfaces in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities. Betco Triforce is a one-step fungicide at 1/2 oz. per gallon in 250 ppm hard water and 5% serum. For mold and mildew: At 1/2 oz. per gallon, Betco Triforce will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard, nonporous surfaces. Follow disinfection instructions. Repeat treatment every seven days, or more often if new growth appears This product is not to be used as a terminal sterilant / high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body.TO SANITIZE SOFT SURFACES:Add ½ oz. per gallon of water. Apply use-solution with a sprayer. Hold bottle 6" - 8" from surface and spray until fabric is wet. Fabric must remain wet for 5 minutes. Allow fabric to Air dry. Soiled areas must be cleaned prior to sanitizing.*KILLS HIV AND HBV AND HCV ON PRE-CLEANED ENVIRONMENTAL SURFACES / OBJECTS PREVIOUSLY SOILED WITH BLOOD / BODY FLUIDS in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces / objects with blood or body fluids, and in which the surfaces / objects likely to be soiled with blood or body fluids can be associated th the potential for transmission of Human Immunodeficiency Virus Type 1 [HIV-1] [associated with AIDS] or Hepatitis B Virus [HBV] or epatitis C Virus [HCV].Special Instructions for Cleaning and Decontamination against HIV-1 or HBV or HCV on Surfaces / Objects Soiled With Blood / Body Fluids. Personal Protection: Cleanup must always be done wearing protective gloves, gowns, masks and eye protection. Cleaning Procedure: Blood and other body fluids containing HIV-1 or HBV or HCV must be thoroughly cleaned from surfacesand objects before application of Betco Triforce.2 It is a violation of Federal law to use this product in a manner inconsistent with its labeling. This product contains hydrogen peroxide. This product must not be mixed or stored with products containing ammonia and bleach, or other reducing and oxidizing agents. Contact with metals, metal ions, wood dust, or wood shavings may cause product decomposition. DISINFECTION: To disinfect hard non-porous inanimate surfaces, dilute 2 ozs. of concentrate per gallon of water (1:64 dilution). Remove heavy soil deposits from surfaces. Apply to surfaces using a cloth, mop, sponge, or coarse trigger sprayer. Spray 6-8 inches from surface to be treated, thoroughly wetting the surface. Allow surface to remain wet for 10 minutes. Rub with brush, sponge, or cloth. Do not breathe spray. Wipe area with a clean cloth or allow to air dry. When using on food contact surfaces: counter tops, highchairs, thoroughly rinse all treated surfaces with potable (tap) water. This product must not be used to clean eating utensils, glassware and dishes. GENERAL CLEANING: For cleaning and deodorizing, dilute 2 ozs. of concentrate per gallon of water (1:64). Cleaning may be accomplished with a clean mop, sponge, squeegee, wet vacuum system or trigger spraying device. Spray 6-8 inches from the surface to be treated, thoroughly wetting the surface. After cleaning, remove suspended soils with a clear water rinse, vacuum pick up, or by wiping with a clean mop, sponge, squeegee, or cloth or allow to air dry. Do not breathe spray. DEODORIZATION: To deodorize, apply this product as indicated under the heading DISINFECTION. For heavy duty deodorization dilute this product at 4 to 6 ounces per gallon and apply as directed under heading DISINFECTION. CLEANING TOILET BOWLS and URINALS: Swab bowl with brush to remove heavy soil prior to cleaning. Clean toilet bowl and urinal exteriors by applying use-solution around the bowl and up under the rim. Stubborn stains may require brushing. Thoroughly wet the bowl and urinal surfaces with a use-solution of 2 ozs. per gallon of water. Swab the bowl completely using a scrub brush or mop. Let stand for 10 minutes.2 TO DISINFECT:Step 1Use full strength or mix 1 cup per ½ gallon of water and apply on hard, nonporous surfaces with a clean sponge or cloth.Step 2Allow surface to remain visibly wet for 10 minutes.Step 3Rinse with water.TipFor visibly soiled surfaces, pre-clean surfaces before disinfecting. To ensure stability, prepare solutions daily.TO CLEAN:Step 1Mix ? cup per gallon of water.Step 2Mop, wipe, or spray with solution.Step 3Rinse with water.TipFor tough jobs, use full strength and rinse immediately.14 Usage Instructions It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Refill only with this product. Prime trigger by pumping before first use. Hold trigger 6-8" from surface. TO DISINFECT HARD, NONPOROUS SURFACES: Spray and leave visibly wet for 10 min. Food-contact surfaces must be rinsed with potable water. TO SPOT SANITIZE SOFT SURFACES**: Spray until surface is wet. Leave visibly wet for 5 min. Let air dry. **For use as a spot sanitizer on fabrics and textiles.3 Add the product at ½ oz. per gallon of water (1:256)., Pre-clean heavily soiled areas. For Use as a One-Step Cleaner/Disinfectant Apply use solution to hard, non-porous environmental surfaces. To disinfect, all surfaces must remain wet for 10 minutes., Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary Note: Rinsing is not necessary unless floors are to be coated with finish or restorer. All food contact surfaces such as appliances and kitchen countertops must be rinsed with potable water. Do not use on glassware, utensils or dishesFor Use as a Cleaner and Deodorizer Apply use solution to hard, non-porous surfaces. Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary. For Use as a Non-Acid Bowl Cleaner/Disinfectant in Toilet Bowls and Urinals from Use-DilutionEmpty toilet bowls by forcing water through the trap. Apply use solution to exposed surfaces in toilet bowls and urinals. Swab entire surface area especially under rim. Allow entire surface to remain wet for 10 minutes. Flush toilet or urinal and rinse swab applicator thoroughly.For Use to Clean and Disinfect Shower Rooms, Locker Rooms and Other Large, Open Areas with Floor Drains Apply use solution to floors, walls and ceilings. All surfaces must remain wet for 10 minutes. Scrub and rinse surfaces thoroughly and let air dry To Kill Mold, Mildew and Fungi (in 5% soil load) Apply use solution to hard, non-porous environmental surfaces and allow surfaces to remain wet for 10 minutes. Wipe and let air dry To Control Mold and Mildew Apply use solution to pre-cleaned hard, non-porous environmental surfaces and allow to air dry. Repeat weekly or when growth reappears1 Cleans as easy as: 1) Shake, 2) Spray, 3) Wipe. For best results, spray onto cloth or hold can upright 6-8" from surface to be cleaned. Safe for all finished, sealed surfaces.1 Directions for Use Hard Surfaces Shake well., Hold can upright 6-8 inches from the surface., Spray surface until thoroughly wet. Surface will be disinfected after 5 minutes.Note: Heavy soil must be removed prior to disinfecting. A potable water rinse is required for food contact surfaces. Use as directed.Soft Surfaces Shake well., Hold can upright 6-8 inches from the surface., Using a smooth zig-zag motion, spray mist across fabric until wet, but do not saturate., Air dry. Bacteria will be killed in 30 seconds.Note: For first-time use on soft surfaces, spot-test in a small, inconspicuous area. Use as directed.Air Close all doors, windows and air vents., Shake well., Hold can upright and spray toward center of room for 10 seconds. Odor-causing bacteria in the air will be killed instantly., After spray has settled, resume normal air ventilation. Repeat as needed.Note: For maximum effectiveness, relative humidity should be between 45% and 70%. Use as directed. Use Sites Dental offices, Doctor offices, Hospitals, Long-term care facilities, Nursing homes, Patient areas, Waiting rooms Key Surfaces Hard Surfaces Bed pans, Carts, Doorknobs, Empty wastebaskets, Remote controls, Light switches, Telephone receivers, Walkers, Wheelchairs1 Directions for Use It is a violation of Federal law to use this product in a manner inconsistent with its labeling.Preparation of use-solution:Add 5 oz. per gallon of water, to disinfect hard precleaned nonporous surfaces.Disinfection/*Virucidal Directions:Remove gross filth or heavy soil, then thoroughly clean surfaces. Apply use-solution to hard nonporous surfaces, thoroughly wetting surfaces with a cloth, mop, sponge or sprayer. For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface, rub with brush, sponge or cloth. Avoid breathing spray. Treated surfaces must remain wet for 10 minutes. Wipe dry with a clean cloth or sponge or let air dry. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware or dishes. Prepare a fresh solution daily or more often if the use-solution becomes visibly diluted or soiled. This product is not for use on medical device surfaces.*KILLS HIV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDSin health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS).SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 ON SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS. PERSONAL PROTECTION:Clean-up should always be done wearing protective latex gloves, gowns, masks, eye protection.CLEANING PROCEDURE:Blood and other body fluids containing HIV must be thoroughly cleaned from surfaces and objects before application of this product.CONTACT TIME:Leave surfaces wet for 1 minute (60 seconds). Use a 10 minute contact time for disinfection against all other viruses, bacteria and fungi claimed.DISPOSAL OF INFECTIOUS MATERIAL:Blood, body fluids, cleaning materials and clothing should be autoclaved and disposed of according to local regulations for infectious waste disposal.To Clean and Deodorize or to Preclean Prior to Disinfection:Depending on the soil level of the area to be cleaned, use 12 - 16 oz. of this product per gallon of water. Rub with brush, sponge or cloth. Wipe dry with a clean cloth or sponge or let air dry.For Mildew Control:Follow directions for Disinfection. Repeat treatment every seven days or when new growth appears.Deodorizing directions: Nursing Homes, Hospitals, Hotels, Schools:2 - 4 oz. in chemical toilets, waste receptacles, bed pans, drainage bottles, diaper pails, hampers, disposals, commodes and air conditioner pans will eliminate odors.1 Directions for Use on Hard Non-Porous Surfaces Hold the can upright 15cm to 20cm from a pre-cleaned surface and spray for 2 to 3 seconds until covered with mist, To Disinfect: allow surface to remain wet for 10 minutes. To disinfect SARS-CoV-2 (the virus that causes COVID-19) allow the surface to remain wet for 15 seconds, To Sanitize: let stand 30 seconds, To control the growth of mold and mildew and their odours, To Deodorize: spray on surface as needed, To Sanitize Fabrics: spray a light even coating on fabric until wet. Let stand 5 minutes. Do not saturate1 Directions for Use To Clean and Disinfect: Use on hard, nonporous surfaces. Spray surface until surface is thoroughly wet. Surface must remain visibly wet for 2 minutes. Then wipe. For visibly soiled areas, a precleaning is required. To Sanitize and Deodorize: Use on hard, nonporous non-food-contact surfaces. Preclean visibly soiled surfaces. Spray surface until thoroughly wet. Allow treated surface to remain visibly wet for 15 seconds. Allow to air dry or wipe dry. Use Sites Schools, Offices / Break rooms, Day care centers, Recreational centers, Public facilities1 DisinfectionStep 1 Use full strength or mix 1 cup per ½ gallon of water and apply on hard, nonporous surfaces with a clean sponge or cloth.Step 2 Allow surface to remain visibly wet for 10 minutes.Step 3 Rinse with water.TipFor visibly soiled surfaces, pre-clean surfaces before disinfecting. To ensure stability, prepare solutions daily.TO CLEANStep 1 Mix ? cup per gallon of water.Step 2 Mop, wipe, or spray with solution.TipFor tough jobs, use full strength and rinse immediately.LAUNDRYFor extra cleaning and deodorizing power, add 1/4 cup of Pine-Sol to your load along with regular detergent. Use only on white or colorfast fabrics. Do not use the product full strength directly on fabrics.1 For School, Restaurant, Food Handling and Processing Areas, Bar and Institutional Kitchen Use. This product kills 99.99% of Foodservice Germs E. coli, Salmonella, and Listeria. This product is an effective sanitizer at 200 ppm active quat for use on food contact surfaces in 500 ppm hard water against: Campylobacter jejuni, (Community Associated) Methicillin-Resistant Staphylococcus aureus, Escherichia coli, Escherichia coli 0157:H7, Klebsiella pneumoniae, Listeria monocytogenes, Salmonella enterica, Shigella sonneii, Staphylococcus aureus, Staphylococcus aureus Methicillin-Resistant - MRSA, Yersinia enterocolitica and Vibrio cholerae.DIRECTIONS FOR USEIt is a violation of Federal Law to use this product in a manner inconsistent with its labeling.Disinfection Directions:Add 3 oz. of this product per 5 gallons of water to disinfect hard, nonporous surfaces. Before use in federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected. When used on surfaces in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities, this product is an effective fungicide against Trichophyton mentagrophytes the athlete's foot fungus. Apply use-solution with a cloth, mop, sponge, sprayer or by immersion, thoroughly wetting surfaces. For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface; rub with brush, sponge or cloth. Do not breathe spray. Note: For spray applications, cover or remove all food products. Treated surfaces must remain wet for 10 minutes. Wipe dry with a clean cloth, sponge or mop or allow to air dry. Rinse food contact surfaces such as counter tops, tables, picnic tables, exteriors of appliances and / or stove tops with potable water prior to reuse. Do not use on glasses, dishes or utensils as a disinfectant. For heavily soiled areas, preclean first. Prepare a fresh solution daily or more often if the use solution becomes visibly diluted or soiled.For Use on Finished Floors: To limit gloss reduction use this product at 3 oz. per 5 gallons of water. Apply with a damp mop or autoscrubber. For use as a One-Step Cleaner and Disinfectant Against Bacteria and Viruses by Electrostatic Spraying: Electrostatic spray application is for efficacy claims with a 10 minute contact time and 450 ppm concentration. This application method is not to be used to treat hard, non-porous surfaces for sanitization or fungicidal claims. Ensure bystanders and pets are not present in the room during application., Clean visibly dirty surfaces prior to spraying., Wear an N95 filtering facepiece respirator or half face respirator with a N95 filter and eye protection when spraying., Select a spray nozzle that produces spray droplet particles with a volume median diameter =80µm, Place the electrostatic spray function in the ON position for electrostatic spray models that have the functionality to toggle ON/OFF., Hold the sprayer nozzle 1-2 feet away from the target surface. Starting at the highest point and working down to the lowest point, spray target surfaces using a smooth methodical "S" pattern. To avoid leaving gaps in sprayed surfaces, overlap previously treated surfaces when moving onto subsequent sections., The target surface must remain visibly wet for 10 minutes. Re-apply product as necessary to keep surface visibly wet for the duration of the contact time. Wipe surfaces dry or allow to air dry., Allow the treated room to remain unoccupied for 15 minutes before reentering.1 It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.DILUTION: 1:64 (660 ppm quat) - 2 ounces per gallon of waterThis product is not for use on medical device surfaces.DISINFECTION/CLEANING/DEODORIZING DIRECTIONS:Remove heavy soil deposits from surface, then thoroughly wet surface with a use-solution of 2 ounces of the concentrate per gallon of water. The use-solution can be applied with a cloth, mop, sponge, or coarse spray or by soaking. For sprayer applications, use a coarse spray device. Spray 6-8 inches from the surface, rub with a brush, cloth or sponge. Do not breathe spray. Let solution remain on surface for a minimum of 10 minutes. Rinse or allow to air dry. Rinsing of floors is not necessary unless they are to be waxed or polished. Food contact surfaces must be thoroughly rinsed with potable water. This product must not be used to clean the following food contact surfaces: utensils, glassware, and dishes.For Human Coronavirus,treated surfaces must remain wet for 1 minute. Wipe dry with a clean cloth, sponge or mop or allow to air dry.For Influenza Virus Type A, treated surfaces must remain wet for 2 minutes. Wipe dry with a clean cloth, sponge or mop or allow to air dry. Prepare a fresh use-solution daily or more often if the solution becomes visibly dirty or diluted.FUNGICIDAL DIRECTIONS:For use in areas such as locker rooms, dressing rooms, shower and bath areas, and exercise facilities follow disinfection directions.MILDEWSTATIC INSTRUCTIONS:Will effectively control the growth of mold and mildew, plus the odors caused by them when applied to hard, nonporous surfaces such as walls, floors and table tops. Apply use-solution at 2 ounces per gallon of water with a cloth, mop, sponge, or coarse spray. Make sure to wet all surfaces completely. Let air dry. Repeat application weekly or when growth reappears.*KILLS HIV-1 (AIDS VIRUS) AND HBV (HEPATITIS B VIRUS) AND HCV (HEPATITIS C VIRUS) ON PRECLEANED, ENVIROMENTAL SURFACES / OBJECTS PREVIOUSLY SOILED WITH BLOOD BODY FLUIDSin health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood / body fluids, and in which the surfaces / objects likely to be solid with blood / body fluids that can be associated with the potential for transmission of Human Immunodeficiency Virus Type I (HIV-1) (associated with AIDS) or Hepatitis B Virus (HBV) or Hepatitis C Virus (HCV).SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 (AIDS VIRUS) OR HBV OR HCV OF SURFACES / OBJECTS SOILED WITH BLOOD / BODY FLUIDS:Personal Protection: Disposable protective gloves, gowns, face mask and eye coverings, as appropriate, must be worn during all cleaning of blood / body fluids and during decontamination procedures. Cleaning Procedures: Blood / body fluids must be thoroughly cleaned from surfaces / objects before application of disinfectant. Contact time : HIV-1 (AIDS virus) is inactivated after a contact time of 4 minutes at 25 C (77 F)(room temperature. HBV and HCV are inactivated after a 10 minute contact time. Use a 10-minute contact time for other viruses, fungi and bacteria listed. Disposal of Infectious Materials: blood / body fluids should be autoclaved and disposed of according to federal, state and local regulations for infectious waste disposal.1 It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Preparation of use-solution: Add 5 oz. per gallon of water, to disinfect hard precleaned nonporous surfaces. Disinfection/*Virucidal Directions: Remove gross filth or heavy soil, then thoroughly clean surfaces. Apply use-solution to hard nonporous surfaces, thoroughly wetting surfaces with a cloth, mop, sponge or sprayer. For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface, rub with brush, sponge or cloth. Avoid breathing spray. Treated surfaces must remain wet for 10 minutes. Wipe dry with a clean cloth or sponge or let air dry. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware or dishes. Prepare a fresh solution daily or more often if the use-solution becomes visibly diluted or soiled. This product is not for use on medical device surfaces. *KILLS HIV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS). SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 ON SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS. PERSONAL PROTECTION: Clean-up should always be done wearing protective latex gloves, gowns, masks, eye protection. CLEANING PROCEDURE: Blood and other body fluids containing HIV must be thoroughly cleaned from surfaces and objects before application of this product. CONTACT TIME: Leave surfaces wet for 1 minute (60 seconds). Use a 10 minute contact time for disinfection against all other viruses, bacteria and fungi claimed. DISPOSAL OF INFECTIOUS MATERIAL: Blood, body fluids, cleaning materials and clothing should be autoclaved and disposed of according to local regulations for infectious waste disposal. To Clean and Deodorize or to Preclean Prior to Disinfection: Depending on the soil level of the area to be cleaned, use 12 - 16 oz. of this product per gallon of water. Rub with brush, sponge or cloth. Wipe dry with a clean cloth or sponge or let air dry. For Mildew Control: Follow directions for Disinfection. Repeat treatment every seven days or when new growth appears. Deodorizing directions: Nursing Homes, Hospitals, Hotels, Schools: 2 - 4 oz. in chemical toilets, waste receptacles, bed pans, drainage bottles, diaper pails, hampers, disposals, commodes and air conditioner pans will eliminate odors.1 It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is not for use on critical or semi-critical medical device surfaces. DISINFECTION, DEODORIZING, AND CLEANING: Remove gross filth or heavy soil prior to application of the product. Hold container six to eight inches from surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and the surface to remain wet for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 1 minute and for HBV and HCV 5 minutes). No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge. This product will not leave grit or soap scum. Disinfection of animal quarters and kennels: Before using this product, remove all animals and feed from premises. Remove all litter and droppings from floors, walls and surfaces of facilities occupied or traversed by animals. Empty all troughs, racks and other feeding and watering appliances. Thoroughly clean all surfaces with soap or detergent and rinse with water. Apply this product for disinfection of pre-cleaned animal quarters and kennels. Saturate the surfaces with this product for a period of 3 minutes (for Bovine Viral Diarrhea Virus (BVDV) 5 minutes) (for Feline Calicivirus and Rabies virus 30 seconds) (for Canine Parvovirus 10 minutes). Ventilate building and other closed spaces. Do not house animals or employ equipment until treatment has been absorbed, set or dried. All treated equipment that will contact feed or drinking water must be rinsed with potable water before reuse. Using approved AOAC test methods, in the presence of 5% blood serum and a 3 minute contact time, unless otherwise noted, this product kills the following organisms on hard non-porous inanimate surfaces: BACTERICIDAL ACTIVITY: Pseudomonas aeruginosa, Listeria monocytogenes, Staphylococcus aureus, Salmonella (choleraesuis) enterica, Enterococcus faecium, Escherichia coli, Escherichia coli O157:H7, Streptococcus pyogenes (Necrotizing Fasciitis-Group A). ANTIBIOTIC-RESISTANT BACTERICIDAL ACTIVITY: Methicillin resistant Staphylococcus aureus (MRSA), Vancomycin resistant Enterococcus faecalis (VRE), Vancomycin intermediate resistant Staphylococcus aureus (VISA). TUBERCULOCIDAL ACTIVITY - This product exhibits disinfectant efficacy against Mycobacterium tuberculosis BCG at 20 degrees Centigrade (20° C) when the treated surface is allowed to remain wet for 5 minutes. VIRUCIDAL ACTIVITY - This product kills on hard, non-porous inanimate surfaces when allowed to remain wet for a 10 minute contact time against: Hepatitis A Virus (HAV), Poliovirus Type 1, Canine Parvovirus. This product, when used on environmental, inanimate hard surfaces exhibits virucidal activity against: Hepatitis B Virus (HBV), Hepatitis C Virus (HCV) and Bovine Viral Diarrhea Virus (BVDV) when the treated surface is allowed to remain wet for 5 minutes; Human Coronavirus, SARS associated Coronavirus and Avian Influenza A strains H3N2 and H9N2 for 2 minutes; Rhinovirus type 39, and Rotavirus for 3 minutes; HIV-1 (associated with AIDS) for 1 minute (60 seconds); and Norovirus (Norwalk virus), Feline Calicivirus and Rabies Virus (CDC) for 30 seconds.1 Place bottle on sink partition., Adjust slide on bottle to secure on sink partition and close drain., Align bottle so that flow of water from the faucet falls directly into inlet on top of bottle. (faucet drop height of 4-8" is required), Fill sink with water at a flow rate of 4-8 gallons/minute (15-30 liters/minute).See Product Label for product specific use directions.1 Pre-clean heavily soiled areas., Apply product by coarse trigger spray to hard, non-porous inanimate surfaces., All surfaces must remain visibly wet for 1 minute. Use 5-minute contact time for TB and a 3 minute contact time for fungi., Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary. Note: Rinsing is not necessary unless floors are to be coated with finish or restorer. All food contact surfaces must be rinsed with potable water. Do not use on glassware, utensils, or dishes. Prior to first use on a particular surface, it is recommended to test in a small, discreet area if there is concern of incompatibility, or contact a Diversey representative.To Spot Sanitize Soft Surfaces Remove gross filth prior to sanitization., Hold bottle upright 6" - 8" from surface., Spray until fabric is wet. DO NOT SATURATE. Allow surface to remain wet for 30 seconds., Gently blot with a clean, damp, color safe cloth and/or let air dry. For difficult odors or heavy fabrics, repeat application.,1 Shake well before using. General Cleaning: Hold can upright and spray about eight inches from surface., Wipe with soft, clean cloth for best results., If using on electronic equipment, spray product directly onto cloth, then dust as usual.1 Special Instructions for Using This Product to Clean and Decontaminate Against HIV-1, HBV and HCV on Surfaces/Objects Soiled with Blood/Body Fluids: Personal Protection: When handling items soiled with blood or body fluids, use disposable impervious gloves, gowns, masks and eye coverings. Cleaning Procedure: Blood and other body fluids must be thoroughly cleaned from surfaces and other objects before applying this product. Contact Time: Allow surfaces to remain wet for 1 minute, let air dry. For all other organisms, see directions for contact times. Disposal of Infectious Materials: Use disposable impervious gloves, gowns, masks and eye coverings. Blood and other body fluids must be autoclaved and disposed of according to local regulations for infectious waste disposal.1 Specs & Application Instructions: A no-rinse sanitizer that conveniently and effectively sanitizes food contact surfaces where sanitization is of prime importance, For use on surfaces, utensils and equipment, Use in commercial sinks for sink immersion of utensils1 Spray 6-8 inches from soiled surface., Wipe clean with a dry paper towel or lint-free cloth., Repeat for heavily soiled areas.2 Spray 6-8 inches from surface. Clean with a brush, sponge or cloth. Do not breathe spray. It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.2 Spray on hard, nonporous surfaces and equipment, Use in commercial sinks for sink immersion of utensils, Use in dairies, restaurants, bars and institutions where sanitation is of prime importance1 Spray surfaces and let solution remain on surface for a minimum of 5 minutes, Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary, Prepare a fresh solution if the solution becomes visibly dirty or diluted Dilutable Disinfectant Cleaner 1:16 dilution - Virucidal, Bactericidal, and Fungicidal, including antibiotic resistant bacteria, in 5 minutes, 1:128 dilution - Non-food contact sanitizer in 3 minutes or general purpose cleaning, 1:256 dilution - Floor and general purpose cleaner Note: Rinsing is not necessary unless floors are coated with finish or restorer.All food contact surfaces must be rinsed with potable water. Do not use on glassware, utensils or dishes. Prior to first use on a particular surface, it is recommended to test in a small, discreet area if there is concern of incompatibility, or contact a Diversey representative. Not recommended for floors at dilution 1:16. Refer to product label for complete use instructions.1 Spray surface until thoroughly wet. , Allow surface to remain visibly wet. Read label for contact times. , Wipe surface or let air dry.1 This product can be used in multiple areas such as operating rooms, long-term care facilities, medical facilities, animal treatment facilities, cruise ships, hotels (motels), public buildings, public restrooms, recreational facilities, retail businesses and schools (colleges and universities)1 TO CLEAN AND DISINFECT: Apply to surface until thoroughly wetWipe with a clean cloth or spongeTo disinfect: Pre-clean surfaceApply to surface until thoroughly wetLeave on for 10 minutes before wipingA dirty, grimey corner of a tiled showerTO CLEAN SOAP SCUM AND LIMESCALE: Allow product to sit to penetrate soil before wipingRepeat if necessaryTo operate: Turn nozzle counter clockwise to preferred usageTo clean: Apply to surface until thoroughly wetWipe with a clean cloth or spongeNo rinsing requiredTo clean soap scum and limescale: Allow product to sit to penetrate soil before wipingRepeat if necessaryTo disinfect: Pre-clean surfaceApply to surface until thoroughly wetLeave on for 10 minutes before wipingRinse all food contact surfaces with water after useDoes not harm most surfaces. Rinse bathtub/shower surfaces with water after using product.Do not use on eating/cooking utensils, glasses/dishes or cookware, unfinished, oiled or waxed wood floors.On painted surfaces, test a small inconspicuous area first.Not recommended for use on marble, brass, acrylic plastic or unfinished wood surfaces.1 To Clean and Disinfect: Use on hard, nonporous surfaces. Spray surface until surface is thoroughly wet. Surface must remain visibly wet for 2 minutes. Then wipe. For visibly soiled areas, a precleaning is required. To Sanitize and Deodorize: Use on hard, nonporous non-food-contact surfaces. Preclean visibly soiled surfaces. Spray surface until thoroughly wet. Allow treated surface to remain visibly wet for 15 seconds. Allow to air dry or wipe dry.1 To Sanitize and Disinfect: Pre-clean surface., Hold can upright 6" to 8" from surface., Spray 3 to 4 seconds until covered with mist., To sanitize:, Surfaces must remain wet for 10 seconds then allow to air dry., To disinfect:, Surfaces must remain wet for 3 minutes then allow to air dry. To Control and Prevent Mold and Mildew: Apply to pre-cleaned surface, Allow to remain wet for 3 minutes, Let air dry, Repeat applications in weekly intervals or when mold and mildew growth appears Use on hard, non-porous surfaces Pre-clean surfaces prior to use., Hold can upright 6 to 8 inches from surface., Spray 3 to 4 seconds until covered with mist., Rinse toys and food contact surfaces with potable water after use. To disinfect: Surfaces must remain wet for 3 minutes then allow to air dry., For Norovirus surfaces must remain wet for 10 minutes then allow to air dry To sanitize: Surfaces must remain wet for 10 seconds then allow to air dry. To control and prevent mold and mildew: Apply to pre-cleaned surface., Allow to remain wet for 3 minutes., Let air dry., Repeat applications in weekly intervals or when mold and mildew growth appears. To deodorize: Spray on surfaces as needed. To spot sanitize soft surfaces: Spray until fabric is wet., DO NOT SATURATE., Fabric must remain wet for 30 seconds., Let air dry., For difficult odors, repeat application.1 To Sanitize and Disinfect:Pre-clean surface.Hold can upright 6" to 8" from surface.Spray 3 to 4 seconds until covered with mist.To sanitize:Surfaces must remain wet for 10 seconds then allow to air dry.To disinfect:Surfaces must remain wet for 3 minutes then allow to air dry.To Control and Prevent Mold and Mildew: Apply to pre-cleaned surface, Allow to remain wet for 3 minutes, Let air dry, Repeat applications in weekly intervals or when mold and mildew growth appears1 TO SANITIZE AND DISINFECT:Pre-clean surface.Hold can upright 6" to 8" from surface.Spray 3 to 4 seconds until covered with mist.To sanitize:Surfaces must remain wet for 10 seconds then allow to air dry.To disinfect:Surfaces must remain wet for 3 minutes then allow to air dry.Use on hard, non-porous surfacesPre-clean surfaces prior to use.Hold can upright 6 to 8 inches from surface.Spray 3 to 4 seconds until covered with mist.Rinse toys and food contact surfaces with potable water after use.To disinfect:Surfaces must remain wet for 3 minutes then allow to air dry.For Norovirus surfaces must remain wet for 10 minutes then allow to air dryTo sanitize:Surfaces must remain wet for 10 seconds then allow to air dry.To control and prevent mold and mildew:Apply to pre-cleaned surface.Allow to remain wet for 3 minutes.Let air dry.Repeat applications in weekly intervals or when mold and mildew growth appears.To deodorize:Spray on surfaces as needed.To spot sanitize soft surfaces:Spray until fabric is wet.DO NOT SATURATE.Fabric must remain wet for 30 seconds.Let air dry.For difficult odors, repeat application.1 To sanitize pre-cleaned and potable water-rinsed, non-porous, food contact surfaces, prepare a 200-400 ppm active quaternary solution by adding 1 ounce of sanitizer to 4 gallons of water.To Sanitize Stationary Kitchen and Food Processing Equipment:This product can be used to clean and sanitize hard, non-porous surfaces of equipment such as deli slicers, beverage equipment, ice machines and dispensers.1. Clean with this product according to the label directions.2. To sanitize, apply a use-solution of 0.25 - 0.5 fl.oz. per gallon of water (200 - 400 ppm active) or equivalent dilution by spraying or swabbing until thoroughly wet.3. Allow surfaces to remain wet for at least 60 seconds.4. Drain thoroughly before reuse and allow to air dry.For Use as a Cleaner:Apply Use Solution 1 fl. oz. - 4 fl. oz. of product per 5 gallons of water to hard, non-porous surfaces. Wipe surfaces and let air dry.For Sanitization: When used as a food contact sanitizer at a 1:512 dilution (1.0 fl. oz. of product per 4 gallons of water), (0.25 fl. oz. per 1 gallon of water) in the presence of 500 ppm hard water, this product reduces the following bacteria by 99.999% with a 1 minute contact time on pre-cleaned, hard non-porous inanimate surfaces.For Non-Food Contact Sanitization: When used as a non-food contact sanitizer at a 1:512 dilution, 1.0 fl. oz. of product per 4 gallons of water (0.25 fl. oz. per 1 gallon of water), this product reduces the following bacteria by 99.9% with a 3 minute contact time on pre-cleaned, hard non-porous inanimate surfaces.To Sanitize Hard, Non-Porous Food Contact Surfaces and Equipment:1. Prior to sanitization, remove gross particulate matter with a warm water flush, then wash equipment with detergent or cleaning solution and follow with a potable water rinse.2. Prepare the sanitizing use solution by adding 0.25 - 0.5 fl. oz. per gallon of water (200 - 400 ppm active quat).3. Apply sanitizing solution by immersion, coarse spray, mop, wipe, flood techniques or circulation techniques as appropriate to the equipment or surface to be treated. Allow a contact time of at least 1 minute.4. Allow surfaces to drain thoroughly and air dry before resuming operation. Do not rinse.DISINFECTION DIRECTIONS:Thoroughly clean with this product according to label directions. Spray diluted J-512TM/MC Sanitizer onto surface until wet. After wetting surface, allow surface to air dry or immerse for at least 10 minutes and then let air dry. DO NOT RINSE. DO NOT WIPE.For Disinfection of Food Contact Surfaces: After disinfection of food contact surfaces is complete, rinse surfaces and please follow food contact sanitizer directions found on product label.Diluted Product for Disinfection: @ 1:1601 Use instructions Prior to application, thoroughly clean all surfaces to be treated to remove gross filth or heavy soil.Disinfectant Hold can upright and spray from a distance of 6 to 8 inches until area for treatment is thoroughly moistened. Allow to remain wet for 10 minutes. Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary.Control of Mold and Mildew Spray surface until thoroughly moistened. Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary., Repeat application in 7 days.Control of Fungus Spray surface until thoroughly moistened., Allow surfaces to remain wet for 10 minutes., Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary1 Use instructionsTo sanitize pre-cleaned and potable water-rinsed, non-porous, food contact surfaces, prepare a 200-400 ppm active quaternary solution by adding 1 ounce of sanitizer to 4 gallons of water.To Sanitize Stationary Kitchen and Food Processing Equipment: This product can be used to clean and sanitize hard, non-porous surfaces of equipment such as deli slicers, beverage equipment, ice machines and dispensers., Clean with this product according to the label directions., To sanitize, apply a use-solution of 0.25 - 0.5 fl.oz. per gallon of water (200 - 400 ppm active) or equivalent dilution by spraying or swabbing until thoroughly wet., Allow surfaces to remain wet for at least 60 seconds., Drain thoroughly before reuse and allow to air dryFor Use as a Cleaner:Apply Use Solution 1 fl. oz. - 4 fl. oz. of product per 5 gallons of water to hard, non-porous surfaces. Wipe surfaces and let air dry.For Sanitization:When used as a food contact sanitizer at a 1:512 dilution (1.0 fl. oz. of product per 4 gallons of water), (0.25 fl. oz. per 1 gallon of water) in the presence of 500 ppm hard water, this product reduces the following bacteria by 99.999% with a 1 minute contact time on pre-cleaned, hard non-porous inanimate surfaces.For Non-Food Contact Sanitization:When used as a non-food contact sanitizer at a 1:512 dilution, 1.0 fl. oz. of product per 4 gallons of water (0.25 fl. oz. per 1 gallon of water), this product reduces the following bacteria by 99.9% with a 3 minute contact time on pre-cleaned, hard non-porous inanimate surfaces.To Sanitize Hard, Non-Porous Food Contact Surfaces and Equipment: Prior to sanitization, remove gross particulate matter with a warm water flush, then wash equipment with detergent or cleaning solution and follow with a potable water rinse., Prepare the sanitizing use solution by adding 0.25 - 0.5 fl. oz. per gallon of water (200 - 400 ppm active quat)., Apply sanitizing solution by immersion, coarse spray, mop, wipe, flood techniques or circulation techniques as appropriate to the equipment or surface to be treated. Allow a contact time of at least 1 minute., Allow surfaces to drain thoroughly and air dry before resuming operation. Do not rinse.DISINFECTION DIRECTIONS:Thoroughly clean with this product according to label directions. Spray diluted J-512TM/MCSanitizer onto surface until wet. After wetting surface, allow surface to air dry or immerse for at least 10 minutes and then let airdry. DO NOT RINSE. DO NOT WIPE.For Disinfection of Food Contact Surfaces:After disinfection of food contact surfaces is complete, rinse surfaces and please follow food contact sanitizer directions found on product label. Diluted Product for Disinfection:@ 1:1601 Use instructions Virex® Plus is a one-step, quaternary-based disinfectant cleaner concentrate for use on hard, nonporous surfaces such as floors, walls, glazed porcelain, and plastic surfaces in hospitals, nursing homes, schools, hotels, public areas and other facilities where cleaning and prevention of cross-contamination are critical. Preparation of Disinfectant Use-Solution Mix ½ oz. per gallon of water (1:256). Use 1 oz. per gallon of water to kill Norovirus , Enterobacter aerogenes, and Serratia marcescens. Use 2 oz. per gallon of water to kill Adenovirus Type 5 and Type 7. For Use as a One-Step Cleaner/Disinfectant Apply use-solution with a sprayer, thoroughly wetting surface., Let treated surface remain wet for contact time indicated on label or reference sheet., Wipe dry with a cloth, sponge, or mop, or allow to air dry., Prepare a fresh solution if the solution becomes visibly dirty or diluted For Use as a Cleaner and Deodorizer Apply use-solution using a sprayer., Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary For Use as a Non-Acid Toilet Bowl and Urinal Disinfectant/Cleaner Empty toilet bowl or urinal and apply use-solution to exposed surfaces and under the rim with a sprayer., Brush or swab thoroughly, allow to stand for contact time indicated on the label and flush. To Control Mold and Mildew Follow disinfection instructions., Repeat treatment every seven days, or more often if new growth appears. Dilutable Disinfectant Cleaner 1:256 dilution - Bactericidal, Virucidal, and Fungicidal, in 3 minutes. Kills HIV-1 and Influenza Type A in 1 minute. Some organisms require a 10 minute contact time and/or other dilutions. Please see product label or reference sheet for complete information., 1:128 dilution - Kills Norovirus in 5 minutes.1 Virex® Plus is a one-step, quaternary-based disinfectant cleaner concentrate for use on hard, nonporous surfaces such as floors, walls, glazed porcelain, and plastic surfaces in hospitals, nursing homes, schools, hotels, public areas and other facilities where cleaning and prevention of cross-contamination are critical.Preparation of Disinfectant Use-Solution Mix ½ oz. per gallon of water (1:256). Use 1 oz. per gallon of water to kill Norovirus , Enterobacter aerogenes, and Serratia marcescens. Use 2 oz. per gallon of water to kill Adenovirus Type 5 and Type 7. For Use as a One-Step Cleaner/Disinfectant Apply use-solution with a sprayer, thoroughly wetting surface., Let treated surface remain wet for contact time indicated on label or reference sheet., Wipe dry with a cloth, sponge, or mop, or allow to air dry., Prepare a fresh solution if the solution becomes visibly dirty or diluted. For Use as a Cleaner and Deodorizer Apply use-solution using a sprayer., Air Dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary1

1:107 1:163 1:644 1:128 - 1:2562 1:25611 1:5124 0.5 oz/Gallon1 1:8 - 1:321 1:321 1:64 or 1:1281 1:1281 1:25001 2 oz/Gallon2

AOAC, NSF Category Code C2, Listing No. 1236402 CDC, SHEA, APIC6 EPA16 OSHA5 OSHA, CDC4 VOC, EPA, NSF4 CDC, EPA, OSHA1 CDC, OSHA2 DFE1 EPA, NSF, 27 CDC1 EPA,NSF,Halal1 FDA1 FDA, OSHA1 Greenguard Certified1 HACCP, NSF E31 Kosher2 NSF1 NSF, CDC1 NSF D2, Kosher1 OSHA's BloodBorne Pathogen, EPA1 OSHA, AOAC1 USDA1 VOC2 VOC Compliant OTC1

5%1 25%45 30%3

7.75"2 10.13"9 10.33"2 10.75"3 10.88"2 11.44"4 7.94"1 8"1 10"1 10.30"1 10.60"1 11.60"1 11.88"1

2.50"2 3"6 3.06"3 4.25"3 4.67"2 5.65"4 2.69"1 2.95"1 3.88"1 3.90"1 4.50"1 5.11"1 8.25"1 16.10"1

Blue36 Clear90 Green21 Other20 White63 Yellow30 Brown6 Dual Color15 Orange4 Pink6 Purple14 Red7

2.44"3 2.50"2 3.92"3 4.88"6 5.94"2 7"4 2.69"1 3.88"1 4.75"1 4.92"1 5.11"1 7.48"1

Accelerated Hydrogen Peroxide (AHP)3 Alkyl C12-16 Dimethylbenzyl Ammonium Chloride5 Bleach21 Hydrogen peroxide18 Sodium Hypochlorite15 Water4 Acid Blue 931 Alkaline3 Alkyl C12-14 Dimethylethylbenzyl Ammonium Chloride1 Ammonia1 Citral1 Citric Acid1 Citric acid1 Colorant1 Colorants1 Dicapryl/Dicaprylyl Dimonium Chloride3 Dioctyldimethylammonium Chloride2 Direct Blue 861 Ethyl Alcohol1 Glycol Ether1 hydrogen peroxide1 Isotridecyl Alcohol 3EO3 Methyl Ionone2 n-Alkyl Dimethyl Benzyl Ammonium Chloride1 Para-Cresol1 Phenoxyethanol1 Pine2 Propylene Glycol1 Red 331 Red 401 Sodium Benzoate1 Sodium Metasilicate Pentahydrate1 sodium nitrite1 Terpineol1 Undeceth-72 Vanillin1

No270 Yes45

0%57 10%26 25%12 30%3

Blue26 Clear97 Green19 Purple12 White67 Yellow30 Aqua2 Blue/Green3 Brown2 Clear Blue3 Colorless5 Lavender2 Light Amber4 Light Blue3 Multi7 Orange4 Pale Yellow2 Pink6 Red10 Translucent8 Turquoise4

Hard Surface7 Healthcare6 Hospital6 Multipurpose135 Multi Surface91 Nonporous Surface15 Bathroom2 Commercial3 Commercial Sink1 Fiberglass1 Food2 Food Service2 Food Service Area1 Fryer1 Grocery Store1 Grout1 Hand1 Home1 Hotel2 Household1 Institutional1 Laboratory1 Medical Equipment1 Office2 Poultry Plant1 Public Building1 Restaurant3 Restroom1 Stainless Steel1 Surface2 Toilet1 Upholstery1 Urinal2 Utensil2 Vinyl1 Wall2 Washable Surface3 Wood2

Anti-bacterial21 Antibacterial15 Deodorize30 Dilutable15 Disinfectant48 Easy to Use12 Alkylphenol-free1 Ammonia-free1 Anti-corrosive1 Anti-irritant1 Bleach-free7 BPA-free3 Caustic-free2 CFC-free6 Chemical-free1 Closed System2 Color-free1 Contaminant-free1 Deodorant4 Dirt Resistant1 Dye-free1 Fast Acting2 Fragrance-free6 Freshen2 Fungicide2 Kosher3 Long Lasting2 Mildew Resistant2 Mildewstatic3 Moisturising1 No-rinse1 Non-abrasive10 Non-flammable1 Non-irritating2 Non-porous12 Non-streaking1 NPE-free1 Odorless4 Odor Neutralizer6 Odor Resistant2 Phenol-free1 pH Neutral6 Phosphate-free7 Pleasant Scent4 Pre-moistened1 Residue-free10 Rinse-free8 Scrub-free4 Soft2 Spill Proof2 Spill Resistant2 Streak-free1 Strong1 Tuberculocide1 Unscented4 Versatile2 Virucidal6 VOC-free1 Washable1

Bacteria Remover20 Fungi Remover17 Germs Remover41 Mildew Remover24 Odor Remover31 Virus Remover39 Allergen Remover4 Ash Remover1 Baked-on Food Remover1 Blood Remover3 Coronavirus5 Dirt Remover5 Epoxy Grout Film Remover1 Film Remover2 Fingerprint Remover1 Fluid Remover3 Food Remover4 Grease Remover3 Grime Remover10 Hand1 Hard Water Remover1 Kill Germs1 Mildew Odor Remover1 Milk Remover1 Mineral Remover2 Mold Remover7 MRSA7 Norovirus3 Oil Remover2 Organic Matter Remover1 Residue Remover4 Smear Remover1 Smoke Film Remover1 Soap Scum Remover6 Soil Remover12 Soot Remover3 Spore Remover9 Spot Remover1 Stain Remover4 Tar Remover1 Urine Remover2 Water Based Soil Remover1 Wax Remover1

No306 Yes2

Canada19 Mexico1 Poland2 United States303

Hepatitis C Virus (HCV)7 HIV-1 Human Immunodeficiency Virus Type 115 Methicillin-resistant Staphylococcus Aureus (MRSA)7 Rotavirus5 Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV 2)28 Streptococcus Pyogenes9 Adenovirus1 Aspergillus Niger1 Avian Influenza A1 Canine Parvovirus4 Cold & Flu1 Enterococcus Faecalis2 Escherichia Coli O157:H72 Glycopeptide-Resistant Staphylococcus Aureus (GRSA)1 Hepatitis A Virus (HAV)2 Hepatitis B Virus (HBV)2 Influenza A2 Virus1 Influenza A H1N11 Influenza A Virus1 Influenza B Virus (Strain B/Hong Kong/5/72)1 Influenza Virus3 Klebsiella Pneumoniae1 Listeria4 Listeria Monocytogenes2 Multidrug Resistance (MDR) Klebsiella Pneumoniae1 Mycobacterium Bovis (BCG)3 Mycobacterium Tuberculosis1 Pathogen3 Penicillium Chrysogenum1 Respiratory Syncytial Virus (RSV)2 Rotavirus WA1 Salmonella3 Salmonella Enterica3 Salmonella Typhi1 Severe Acute Respiratory Syndrome Coronavirus (SARS-CoV)5 Staphylococcus Aureus2 Staphylococcus aureus - Community Associated Methicillin-Resistant (CA-MRSA) (NRS384)(USA 300)1 Streptococcus1 Streptococcus Pneumoniae2 Trichophyton Mentagrophytes1 Tuberculosis (TB)3 Vancomycin-resistant Enterococci (VRE)4 Vancomycin-Resistant Staphylococcus Aureus (VRSA)1